Hello, Welcome to FCTEL Technology Co.,Ltd
National service hotline:+086 0571-87007055/56/57 CN

WE ONLY FOCUS ON TRANSMISSION AND ACCESS

Products center

Industrial rail 16-channel 4-20mA analog optical transceive

Type:FCP-A16G Message

Description:This series of devices adopts large-scale FPGA design and adopts original technology to support 1~16 channels of analog signals (current/voltage) to fiber relay. The device adopts dual power supply high-performance FPGA programmable device

Product Description
This series of devices adopts large-scale FPGA design and adopts original technology to support 1~16 channels of analog signals (current/voltage) to fiber relay. The device adopts dual power supply high-performance FPGA programmable device no MCU processing high-speed conversion sampling frequency can reach 20KHZ 12-bit AD conversion chip which solves the problems of electromagnetic interference ground loop interference and lightning damage greatly improving the problem. Control signal reliability security and confidentiality and also solve the problem of limited cable transmission distance.
Functional Properties
The device is paired the local signal input and the opposite signal output; Ø
Support 4~20mA 1-16 way current; or support 0~10V/0~5V 1-16 way voltage; 16 channels of analog input and output can be combined arbitrarily;
16-channel analog AD/DA channel uses FPGA parallel read and write non-MCU sequential read and write mode each channel analog delay <0.1ms;
Each analog quantity reads high-speed sampling data through FPGA and the sampling rate is 20K times/second which is much higher than similar products in the market;
Multimode fiber/single mode fiber is optional multimode can transmit 2KM single mode can transmit 20KM ST/SC/FC interface is optional;
Signal failure protection function; display of electrical interface and fiber running status in all directions 4-20ma interface anti-radar to IEC61000-4-5 (8/20μS) differential mode:
   6KV impedance (2Ω); common mode: 6KV impedance (2Ω) standard
Support wide range of AC and DC input support internal isolation redundant dual power input power supply overload protection anti-reverse protection
Meet the requirements of industrial four-level electromagnetic compatibility;
Super lightning protection function: lightning protection anti-induction high voltage anti-surge etc.;
No fan to efficiently dissipate heat and reduce repair time;
IP40 enclosure protection level able to withstand the test of harsh environment;
rail or wall mounting;
Wide temperature type: working temperature -40 ° C ~ +85 ° C;
All models are tested by 100% baking machine the warranty period is 5 years;
Technical Parameters
 ◆Fiber          

Optical port: 1
Optical fiber: single fiber and double fiber
Fiber Interface: FC/SC/ST/LC (SFP)
Wavelength: 850nm/1310nm multimode; 1310nm/1550nm single mode
No relay transmission distance: 20~120Km
Typical transmit power:
    Single mode 1310/1550nm: ≥-9dBm
    Multimode 850nm: -18dBm
    Multimode 1310nm: -25dBm
Acceptable sensitivity range: -28dBm~- 40dBm  

 ◆Current analog    

Input and output range: 0~20mA (including 4~20mA)
Resolution: 12 digits
Sampling rate: 20K times / sec
Time delay: <0.1ms
Maximum load capacity: 600Ω
Input resistance: 125Ω
Accuracy: 0.4% (normal temperature)  

◆Voltage analog     

Input and output range: 0~10V (including 0~5V)
Resolution: 12 digits
Sampling rate: 20K times / sec
Time delay: <1ms
Maximum load capacity: 600Ω
Input resistance: 100ΚΩ
Accuracy: 0.4% (normal temperature)

◆Working environment    

Working temperature: -40 ° C - +85 ° C
Storage temperature: -40 ° C - +85 ° C
Working humidity: 0% - 95% (no condensation)
MTBF: >100000 hours



Application Scheme