Hello, Welcome to FCTEL Technology Co.,Ltd
National service hotline:+086 0571-87007055/56/57 CN

WE ONLY FOCUS ON TRANSMISSION AND ACCESS

Products center

Modular multi-service Fiber MUX

Type:FC2PM-E16 Message

Description:LCD PDH, 4FE,With 4 multifunction slots, with ALS function,Console or SNMP,1+1 Back up Optic fiber

Product Description

        This device is modular structure point-to-point optical transmission equipment with LCD display, uses the FPGA chips and easy to upgrade. The Main board provide 4*100M channel Ethernet data and 2 AUX port which is for transmitting other data such as RS232/RS485/RS422, two optical interface for optional 1+1 auto protection switch (APS).

        4 slots of tributary with variant plug-in modules which included 4xE1 channels module, 4/8/16 x FXO/FXS module and 2x Nx64K V.35 module.The maximum capacity will be up 4 plug-in modules which could be combinations with above modules.The high flexibility, performance, is the best solution for voice/data/video services in existed market.

Functional Properties

Ø Provides total 16 E1 transparent transmission capacity ;

Ø With char 16*2 LCD display and SNMP agent inside.

Ø Provide Console manage interface(RS232)

Ø Provice one hotline channel for option;

Ø Provide two SFP fiber interfaces, one as master, the other as slave, insuring uninterrupted service transmission.

Ø The rate of optical port is 155Mbps, transmission range can reach 25KM, 40KM, 60KM, 80KM or 100KM;

Ø   Provide two fiber interface 1+1 protect(APS)function ,and ALS(Automatic Laser Shutdown/Reduction)function

Ø   Provide 4 slots plug-in modules:

         4×unFramed E1 module(75Ω)/(120Ω)

         4×Framed E1 module(75Ω)/(120Ω),any timesolts can be set

         4×FXO/FXS/EM2-4/Magnet telephone module

         8×FXO/FXS/2 line audio/Magnet telephone module

         16×FXO/FXS/2 line audio/Magnet telephone module

         2×V.35 (2.048M Fixed speed) module

         2×V.35 (N*64K N=1-32) module

         4×RS232/422/485 module

         4*FE to E1 bridge(wire speed 2.048M) module

Ø Provide 4FE(wire speed 100M)Ethernet channel,support mutual negatiate, Ethernet bandwidth is set on base on multiple of 32K.;

Ø Ethernet port supports full/half duplex, 10M/100M auto-ataptable;

Ø Ethernet port supports VLAN function and has 4 devision mode for user selection;

Ø Ethernet package size support 1916 byte and 4 Ethernet port could be set seperately;

Ø Has complete alarm function and can monitor remote device status;

Ø Supports E1 loop from remote so as to detect and manage device conveniently;

Ø  The combination AC220V and DC-48V for redundant


Technical Parameters

u  Fiber

         Multi-mode Fiber

    50/125um, 62.5/125um,

    Maximum transmission distance: 5Km @ 62.5 / 125um single mode fiber, attenuation (3dbm/km)Wave Length: 820nm

    Transmitting power: -12dBm (Min) ~-9dBm (Max)

    Receiver sensitivity: -28dBm (Min)

    Link budget: 16dBm

        Single-mode Fiber

    8/125um, 9/125um

    Maximum transmission distance: 40Km

    Transmission distance: 40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km)

    Wave Length: 1310nm

    Transmitting power: -9dBm (Min) ~-8dBm (Max)

    Receiver sensitivity: -27dBm (Min)

    Link budget: 18dBm  

u  E1 Interface

    Interface Standard:      comply with protocol G.703;
    Interface Rate:             n*64Kbps±50ppm;
    Interface Code:            HDB3;

    E1 Impedance:             75Ω (unbalance), 120Ω (balance);

    Jitter tolerance:            In accord with protocol G.742 and G.823

    Allowed Attenuation:   0~6dBm

u  Ethernet interface(100/100M)

    Interface rate:              10/100 Mbps, half/full duplex auto-negotiation

    Interface Standard:      Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)

   MAC Address Capability: 4096

    Connector:                  RJ45, support Auto-MDIX

u  FXS Phone Interface

    Ring voltage: 75V

    Ring frequency: 25HZ

    Two-line Impedance: 600 Ohm (pick up)

    Return loss: 40 dB

u  FXO Switch Interface

    Ring detect voltage: 35V

    Ring detection frequency: 17HZ-60HZ

    Two-line Impedance: 600 Ohm (pick up)

    Return loss: 40 dB

u  EM 2/4 Line

    AD: 0dB

    DA: -3.5dB

    Two/Four-line Impedance: 600 Ohm

    Return loss: 20 dB

u   Power

    Power supply: AC180V ~ 260V;DC –48V;DC +24V

    Power consumption: ≤10W

u   Dimension          

    Product Size:         216X140X31mm(WXDXH)

       Piece Weight :    1KG

 u  Working environment

    Working temperature: -10°C ~ 50°C
    Working Humidity:        5%~95 % (no condensation)

    Storage temperature:   -40°C ~ 80°C
    Storage Humidity:         5%~95 % (no condensation)

Application Scheme

Applications


The motherboard provides:
      1. LCD display;
      2.4-way wire-speed 100M shared Ethernet channel;
      3.2-way transparent RS232 / 422/485 asynchronous channels;
      4.1 channel public telephone
      5. SNMP network management
 
4 slot, supports mixed insertion, provide:
           4 × E1 module (75Ω) / (120Ω)
           4 × framing E1 module (75Ω) / (120Ω), you can set an arbitrary time slot
           4 × FXO / FXS / EM2-4 / magnet module
           8 × FXO / FXS /2 wire audio / magnet module
           16 × FXO / FXS /2 wire audio / magnet module
           2 × V.35 (2.048M fixed rate) module
           2 × V.35 (N * 64K N = 1-32) module
           4 × RS232 / 422/485 / switch module
           4 Ethernet bridge (rate 2.048M) module
As above, if you want to achieve 8E1 + 4FE + 32-way telephone (FXO / FXS) function, you can configure two 4E1 cards, two 16xFXO / S telephone cards

DataSheet Download