Hello, Welcome to FCTEL Technology Co.,Ltd
National service hotline:+086 0571-87007055/56/57 CN

中文

Home

WE ONLY FOCUS ON TRANSMISSION AND ACCESS

Popular series: E1+Ethernet PDH Voice Over Fiber Ethernet to E1 Conveter

Products center

Location:首页 > English > Product > Fiber Optic Modems > Ethernet Fiber Modem > Ethernet Fiber Modem >

4FE Fiber Modem （Bandwidth 2M）

Type:FCP-F4 Message

Description:4FE fiber transmission, with the Ethernet to E1-E1 fiber optic MODEM- this device into a 3 point network connection

Product Description
             This device provides one fiber interface and four Ethernet interface to achieve 10/100Base-T Ethernet data transmission on fiber. It is a high performance, self-learning Ethernet bridge. This device is the extension device of Ethernet, using network to achieve local and remote Ethernet interconnecting with serial interfaces at a lower cost. The device has inter-set loop test function to facilitate the project launching and daily maintenance.

Functional Properties
Ø Based on self -copyright  IC
Ø The device can manage the remote device condition , OAM management data did not take up user’s timeslot
Ø The local device can forced the remote device rate follow it
Ø The Ethernet interface supports jumbo frames (2036 Bytes);
Ø Inter-set dynamic Ethernet MAC address (4,096) with local data frame filtering
Ø Optical Ethernet Interface supports 100M, full duplex
Ø 4Channel 10M/100M Ethernet interface can isolate each other to realize communication independently
Ø Have Ethernet monitor self-reset function, the equipment will not dead
Ø The local device can forced the remote device rate follow it(when the device is unframed mode, that is invalid)
Ø Support SNMP Network Management
Ø The device supports unframed mode (2048K) set, it can the remote device condition when unframed
Ø Ethernet interface supports 10M/100M, half/full duplex auto- adaptable, support VLAN
Ø Ethernet interface supports AUTO-MDIX (crossed line and straightly connected line self-adaptable )
Ø Can form the structure: ETH+E1 (A)－－-E1 Optical Fiber Modem(B)－－-Ethernet Fiber Modem (C)
Technical Parameters

u  Fiber

         Multi-mode Fiber

    50/125um, 62.5/125um,

    Maximum transmission distance: 5Km @ 62.5 / 125um single mode fiber, attenuation (3dbm/km)Wave Length: 820nm

    Transmitting power: -12dBm (Min) ~-9dBm (Max)

    Receiver sensitivity: -28dBm (Min)

    Link budget: 16dBm

        Single-mode Fiber

    8/125um, 9/125um

    Maximum transmission distance: 40Km

    Transmission distance: 40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km)

    Wave Length: 1310nm

    Transmitting power: -9dBm (Min) ~-8dBm (Max)

    Receiver sensitivity: -27dBm (Min)

    Link budget: 18dBm

u  Ethernet interface(100/100M)

    Interface rate:              10/100 Mbps, half/full duplex auto-negotiation

    Interface Standard:      Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)

   MAC Address Capability: 4096

    Connector:                  RJ45, support Auto-MDIX


u   Power

    Power supply: AC180V ~ 260V；DC –48V；DC +24V

    Power consumption: ≤10W

u   Dimension          

    Product Size:         216X140X31mm(WXDXH)                

    Simple packaging:  274X193X84mm(WXDXH)

    Piece Weight :      1.2KG

 u  Working environment

    Working temperature: -10°C ~ 50°C
    Working Humidity:        5%~95 % (no condensation)

    Storage temperature:   -40°C ~ 80°C
    Storage Humidity:         5%~95 % (no condensation)


 


Application Scheme

Applications 


DataSheet Download
Related products


Address: 7F,Building 2,NO.9 XiYuan 2nd Road,West Lake Technology Park, Hangzhou,China.

Telephone: 0571-87007055/56/57/75

Fax: 0571-87007140(Marketing)

Alibaba Website: futuretel.en.alibaba.com

Copyright © 2017 FCTEL Technology Co.,Ltd All Rights Reserved