您好,欢迎访问飞畅科技官网!
全国服务热线:+086 0571-87007055/56/57 EN
杭州飞畅科技官网-产品中心

我们只专注于传输与接入

WE ONLY FOCUS ON TRANSMISSION AND ACCESS

产品中心

PRODUCT CENTER

  • 飞畅科技-Adam module Industrial rail 1-4 channel 4-20mA  analog optic
  • 飞畅科技-Adam module Industrial rail 1-4 channel 4-20mA  analog optic
  • 飞畅科技-Adam module Industrial rail 1-4 channel 4-20mA  analog optic
  • 飞畅科技-Adam module Industrial rail 1-4 channel 4-20mA  analog optic

Adam module Industrial rail 1-4 channel 4-20mA analog optic

型号:FCP-A4G留言

描述:This series of devices adopt large-scale FPGA design and original technology and can support 1-4 channel analog signal (current/voltage) to optical fiber relay at the same time. The device is powered by 12-55V AC or DC power supply high p

产品描述
 This series of devices adopt large-scale FPGA design and original technology and can support 1-4 channel analog signal (current/voltage) to optical fiber relay at the same time. The device is powered by 12-55V AC or DC power supply high performance FPGA programmable devices no MCU processing high-speed conversion sampling frequency can reach 20KHZ 12-bit AD conversion chip which solves the problems of electromagnetic interference ground loop interference and lightning damage greatly improving the problem. Control signal reliability security and confidentiality and also solve the problem of limited cable transmission distance.
功能特点
The device is paired the local signal input and the opposite signal output; Ø
Support 4~20mA 1-4 way current; or support 0~10V/0~5V 1-4 way voltage; 4 channels of analog input and output can be combined arbitrarily;
4-channel analog AD/DA channel uses FPGA parallel read and write non-MCU sequential read and write mode each channel analog delay <0.1ms;
Each analog quantity reads high-speed sampling data through FPGA and the sampling rate is 20K times/second which is much higher than similar products in the market;
Multimode fiber/single mode fiber is optional multimode can transmit 2KM single mode can transmit 20KM ST/SC/FC interface is optional;
Signal failure protection function; display of electrical interface and fiber running status in all directions
  
4-20ma interface anti-radar to IEC61000-4-5 (8/20μS) differential mode: 6KV impedance (2Ω); common mode: 6KV impedance (2Ω) standard
Support wide range of AC and DC input support internal isolation redundant dual power input power supply overload protection anti-reverse protection
Super lightning protection function: lightning protection anti-induction high voltage anti-surge etc.;
No fan to efficiently dissipate heat and reduce repair time;
Provide DIN 35mm rail mounting or wall mounting mounting.
Wide temperature type: working temperature -40 ° C ~ +85 ° C;
All models are tested by 100% baking machine;
技术参数
◆Fiber

Optical port: 1
Optical fiber: single fiber and double fiber
Fiber Interface: FC/SC/ST/LC (SFP)
Wavelength: 850nm/1310nm multimode; 1310nm/1550nm single mode
No relay transmission distance: 20~120Km
Typical transmit power:
    Single mode 1310/1550nm: ≥-9dBm
    Multimode 850nm: -18dBm
    Multimode 1310nm: -25dBm
Acceptable sensitivity range: -28dBm~- 40dBm

◆Current analog                       

Input and output range: 0~20mA (including 4~20mA)
Resolution: 12 digits
Sampling rate: 20K times / sec
Time delay: <0.1ms
Maximum load capacity: 600Ω
Input resistance: 125Ω
Accuracy: 0.4% (normal temperature)

◆Voltage analog                     

Input and output range: 0~10V (including 0~5V)
Resolution: 12 digits
Sampling rate: 20K times / sec
Time delay: <1ms
Maximum load capacity: 600Ω
Input resistance: 100ΚΩ
Accuracy: 0.4% (normal temperature)
 

◆Working environment                    

Working temperature: -40 ° C - +85 ° C
Storage temperature: -40 ° C - +85 ° C
Working humidity: 0% - 95% (no condensation)
MTBF: >100000 hours

应用方案
产品视频
EN